Bridge Expansion Joints - Camelot Finger

 

Performance and Features

 

Finger Camelot expansion systems are designed and manufactured to adapt to the movements of large expansion bridges.
In general, they consist of two main components of steel shaped comb, construction asymmetric teeth resting on one plate sliding of the two.
Plates - comb are made of high-strength steel, treated against
corrosion.


The sliding plate is made of stainless steel.


Drainage is via an elastomeric profile mounted tight in the second rolled channels with special section.
Composition System installation requires a careful, well-defined phases. It ensures an effective joint waterproofing and contaminants are automatically removed from the system without having to manual cleaning.


The range of motion for systems Camelot Finger reach up to 400 mm, the exact type being delivered according to the requirements of each expansion joint. The dimensions are specified in the table below.

 

Dimensional characteristics of different types of expansion systems Camelot Finger (mm):

 

Item Type Horizontal movement Width Niche gap B1 Height gap H
01-10-01 SF 80 80 660 500 > 200
01-10-02 SF 120 120 760 500 > 200
01-10-03 SF 160 160 860 500 > 200
01-10-04 SF 200 200 1000 570 > 200
01-10-05 SF 240 240 1180 570 > 250
01-10-06 SF 280 280 1280 570 > 250
01-10-07 SF 320 320 1420 610 > 250
01-10-08 SF 360 360 1520 610 > 250
01-10-09 SF 400 400 1620 610 > 250
Print Print | Sitemap
Copyright © 2016 - 2018. Expansion Joints Ltd. UK. All rights reserved.

Call

E-mail